Laser Measurement & Control

1098293 LaserCheck Power Meter Laser Power Meter, 1W max power, 0.5µW min power, resolution of 10nW, 400-1064nm, 8mmØ detector (Updated RoHS version of #33-1553-000) LaserCheck™ is an inexpensive, hand-held laser power meter that displays measurements on a built-in LCD screen. It is a small, lightweight, self-contained package that can easily be stored in a pocket or tool kit. LaserCheck is micro-processor controlled with wavelength correction, auto-ranging (µW or mW displayed), power overload warning and automatic shutoff. At higher powers the silicon sensor is protected from saturation with a built-in optical attenuator. LaserCheck is supplied ready to use, complete with battery, integral pocket clip, storage case, CE certification and user instruction sheet. To initiate a measurement cycle, press the Sample/Hold button to turn the LaserCheck on, center the beam on the sensor for >2 seconds and release the button to record a measurement of the power. Repeat the cycle to make another measurement or the LaserCheck will switch off automatically after 10 seconds. Integrated sensor Auto-ranging with peak sample-and-hold Power measurement from 0.5 µW-1W ±5% calibrated accuracy from 400-1064 nm Sensor Type Silicon Cell Built-in Attenuator 1 mm-thick NG-10 Aperture Size 8 mm Wavelength Range 400-1064 nm Accuracy ±5% Max. CW Power 10 mW Max. CW Power with Built-in attenuator 1W Min. CW Power 0.5 µW Min. Power Resolution 0.01 µW Displayed Power Ranges 9.99 µW to 999 mW Max. Power Density 0.5W/cm2 Max. Power Density with Built-in Attenuator 30W/cm2 Measurement Display 3-digit LCD with power unit indicator Please observe optical damage threshold specifications for this product. Warranty does not include damage caused by over exposure to high energy laser beams. Please contact sales@coherent.com.au if you require technical advice on appropriate use of this product or if you require further information. QTY: Stock Level